Dräger MT Ethylene Oxide 0.25-10 ppm - PN 8610580 Upgrade Kit Battery Holder This Dräger-Tube is used for

This Dräger-Tube is used for the detection of hydrogen sulfide and has the following standard measuring range: 100-2000 ppm Measurements: 10

A full charge requires approximately six hours

PARAT® 5500 Fire Escape Hood Use: protection against toxic fire-related gases

formaldehyde  measurement is not possible in the presence of SO2

Dräger MT Ethylene Oxide 0.25-10 ppm - PN 8610580 Upgrade Kit Battery Holder This Dräger-Tube is used forDrger MT Ethylene Oxide 0. 25 10 ppm PN : 8610580 Drger MircoTubes Ethylene oxide for Measurement of Etylene oxide with Drger X act 7000. 10 Measurement capabilities Measuring Range: 0,25 10 ppm. Measuring Range 0. 25 to 10 ppm Typical Measuring Time 100 to 500 s Accuracy 25% ( under calibration conditions ) Ambient Conditions Temperature 10 to 30 C Humidity 1 to 25 mg L Cross Sensitivity No influence at 1 ppm ethylene by: 0. 1 ppm acrolein 10 ppm