2" Shackle Assembly for Left Rear Torsion Arm, X7 Front End 70-325 (1) and 70-326 (1)

70-325 (1) and 70-326 (1)

Complete shackle assemblies which include the rod ends and jam nuts are also available

This Jacob's Ladder is considered a 5"-5"-10" ladder

5" steel brake rod on '07 & Up Hyper Chassis in the standard wheelbase configuration

2" Shackle Assembly for Left Rear Torsion Arm, X7 Front End 70-325 (1) and 70-326 (1)Hyper Racing # 03 020 1 Shackles are used to position the torsion arm at the correct angle for the correct progressive spring rate. Torsion arm angle is a function of shackle length in combination with bearing carrier plate hole location. Approximately 1" or 1 1 4" difference in length between the left rear shackle and the right rear shackle is recommended for proper torsion arm angle with the left rear being longer. Our black anodized shackle rods