Rubio Monocoat Renew - 100ml Type_Drill Presses Finish sand between coats with

Finish sand between coats with a fine-grade (220-320) foam sanding pad or 400-grit sandpaper to improve smoothness and adhesion

A knob on the face of the body lets you set any angle from 0° to 15°

Recommended Circuit Size: 40 Amps

table seam

Rubio Monocoat Renew - 100ml Type_Drill Presses Finish sand between coats withRenew is a ready to use product that refreshes, restores and protects surfaces treated with Oil Plus 2C. Renew should be used when the surface feels too dry or rough, or when the finish has worn down due to heavy use. Brings the surface back to a freshly oiled state Restores the depth and vibrancy of the color Masks scratches in the surface as long as the surface is not damaged No overlaps or starting marks Minimal use High coverage: ~100 sq. ft.